WatchDog WatchDog 3349SS, Руководство по эксплуатации продукта

Страница: 10 / 36

10
Connecting to your PDA or Laptop
Connect your PDA cable to the 9 pin serial connector on the
connector box. If you are using a laptop or other PC, the power
cable will prevent a direct connection. You must use either a 9
pin M-F serial extension cable, or if your laptop does not have a
serial port, a USB to Serial converter cable (available from
Spectrum Technologies as Item # 3661USB).
If your cable has anchor screws, use them to hold the cable se-
curely to the connector box. However, Murphy’s Law states
that it is more likely that your cable will have anchor nuts, as in
the photo below.
If you encounter this situation, perform the following steps to
connect your cable securely.
For a second generation connector box, use a wrench or pliers
to unscrew the anchor nuts. No disassembly is required.
For a first generation connector box:
1. With a Phillips screwdriver, remove
the four screws from the back of the
connector box.
2. Remove the back of the connector box.
3. Using a screwdriver and a pair of pli-
ers, remove the two nuts from the
screws holding the 9 pin serial connec-
tor .