WATANABE WPMZ-5 Скачать руководство пользователя страница 6

Страница: 6 / 12

MODEL WPMZ-5-□□□-□□-□□□

6/12

IM-0834-03

８.

BASIC OPERATIONS FOR SETTING DISPLAYS

Basic operations for setting displays are shown as below.
The following is an example for changing the voltage of sensor power supply.

①

By pushing the “MENU” key in the measurement mode, the display moves to the setting display and displays the 1st layer (major

categories).
By moving the cursor with “arrow key (UP/DOWN)”, the selection of major categories to set can be changed.

On the 1st layer, by pushing the “MENU” key, the display returns to the measurement display.

②

Pointing the cursor to a major category to set and pushing “arrow key (RIGHT)”, the display moves to the 2nd layer (small categories)

By moving the cursor with “arrow key (UP/DOWN)”, the selection of small categories of the setting can be changed.
If the “arrow key (LEFT)” is pushed, the display returns to the 1st layer.

On the 2nd layer, by pushing the “MENU” key, the display returns to the measurement display.

③

Pointing the cursor to a small category to set and pushing “arrow key (RIGHT)”, the display moves to the 3rd layer (setting items).

If the “arrow key (LEFT)” is pushed, the display returns to the 2nd layer.

On the 3rd layer, by pushing the “MENU” key, the display returns to the measurement display.

④

By moving the cursor with “arrow key (UP/DOWN)”, select a setting item.

If the “arrow key (LEFT)” is pushed, the display returns to the 2nd layer.

⑤

At the selected setting item, by pushing “arrow key (RIGHT)”, the display moves to the 4th layer (setting contents) and a current

selected content has a check mark. If the “arrow key (LEFT)” is pushed, the display returns to the 3rd layer.

⑥

By moving the cursor with “arrow key (UP/DOWN)”, select a content.

If the “arrow key (LEFT)” is pushed, the display returns to the 3rd layer.

⑦

By pushing the “ENTER” key”, the selected content is confirmed and a check mark accompanies.

If the “arrow key (LEFT)” is pushed, the display returns to the 3rd layer.

⑧

By pushing the “MENU” key, the selected content is stored and returns the measurement display.

If the power is shut down before being pushed the “MENU” key, the selected content is not stored.

ENTER

In any setting displays, the display returns to the
measurenent display by pushing .

（Measurement display）

1st layer

2nd layer

3rd layer

4th layer

①

②

③

⑤

⑥

⑦

⑧

④

Setting items can be selected by

（Measurement

display）

Содержание WPMZ-5













Результаты поиска

Содержание WPMZ-5

Отзывы:

WATANABE WPMZ-5, Краткое руководство пользователя, Страница: 6 / 12

Результаты поиска

Содержание WPMZ-5

Отзывы: