Page | 03
F. Notifications
1. If there is a movement in your house, a notification on
your phone will be displayed.
2. The motion sensor blue light indicator will turn on.
3. Monitor the battery level directly from the app to ensure
the smart motion sensor will never run out of power.
G. Q&A
1. Problem connecting the device to our app.
Try resetting your device by following the instructions in Section D. If problem persists,
please try connecting the device using the AP mode:
2. If there are no notifications when there is a movement.
•
Press the power button for 5-10 seconds or until the indicator light starts flashing
quickly.
•
Press the power button for another 5-10 seconds until the light flashes now slowly.
•
Press “Add Device” in the Wstein App.
•
Click “AP Mode” in the top right hand corner.
•
Select your home’s Wi-Fi network & enter your Wi-Fi Password.
•
Go to your Wi-Fi setting and connect to “SmartLife_XXXX”.
•
Go back to the app and finish the setup.
•
Go to Profile > Settings > make sure that the push notification is turned on.
•
Go to your mobile setting, make sure that notification is allowed in the Wstein App.
H. General Specification
•
Battery
: 2 x CR2 - 3V
•
Operating Voltage
: 6V
•
Recommended Installation Height
: 2 m
•
Detection Distance
: 5 m
•
Horizontal Detection Angle
: 100 degree
•
Wifi Frequency
: 2.4GHz
•
Wifi Protocol
: 802.11b/g/n
•
Standby Battery Life
: 1 years
For more information, please visit:
www.wasserstein-home.com
or contact us at:
Made in China
