Wassermann Polyquick 260, Руководство пользователя

Страница: 6 / 24

4 Responsibility for Operation or Damage
The responsibility for operating the device lies exclusively with the owner or user if said
device is incorrectly serviced, maintained or altered by persons not employed by an
authorised dealer or if the device is used in a manner contrary to its specified purpose.
The unit has to be maintained and operated in accordance with this user manual.
Wassermann Dental-Maschinen GmbH is not responsible for damage arising from the
nonobservance of these instructions.
Warranty and responsibility provisions contained in the sales and supply conditions of
Wassermann Dental-Maschinen GmbH are not extended by these instructions.
5 Application
The Polyquick 260 is a pressure polymerisation unit for hot and cold polymerisation of
plastics. It can be set to a maximum temperature of 105°C and the polymerisation
pressure can be adjusted to a maximum of 5 bar. In automatic mode, the polymerisation
time can be preselected up to 99 hours. It has a particularly large pressure pot volume and
can hence also accommodate extra large articulators or up to 6 brass flasks including
clamp. A touch screen and the newly developed control panel allow the user to set the
relevant parameters quickly and easily using self-explanatory symbols. The Polyquick 260
can also be used as a pressure compactor without heating.
Only use the device for this type of application.
6