Wassermann Polyquick 260, Руководство пользователя

Страница: 5 / 24

3 Safety Guidelines
Configuring and operating this equipment requires precise knowledge and observance
of the instructions in this user manual . The equipment is designed only for its intended
application.
WARNING:
Servicing and repairs should be carried out only by authorised specialists.
Disconnect the power plug before starting any maintenance work.
Make sure that the equipment is connected to the correct power source.
The safety valve on the pressure tank opens automatically if the operating
pressure is more than 7 bar.
The pressure can be activated only if the door is closed completely, since a
safety door contact is installed.
Dry-run protection, which switches off at 112°C (brown button on the left side of
the device).
WARNING: Risk of scalding during the Hot Polymerisation.
Never open the lid while the unit is under pressure !
Never open the lid while the temperature is higher than 97 °C !
Open the lid slowly!
Display information have to be followed !
For safety-related reasons (hot water, pressure), only the valves and hoses
meant for this purpose must be used for draining. If parts of different
design are used / installed (self-made), there is a risk of scalding!
5