Wassermann Polyquick 160-T120, Руководство пользователя

Страница: 18 / 28

8.2 Operation
•
Open the lid.
•
First set the workpieces, then fill the water till all the polymerisation parts are
covered ( max. up to the engraving = Marking in the tank) and close the lid up to the
stop.
•
Switch on the main switch, the unit will automatically heat up to 60°C or up to the
value selected as the pre-heating temperature. If warning appears, close the
lid.
•
Activate the pressure.
•
The process of polymerisation starts when you touch the symbol . After the
process of polymerisation has ended, the temperature falls to the preset
temperature again.
18
A
5 6
5
6
A