7 Assambly
7.1
Installing the Angled Mount
The angled mount is inserted as required in the HSS-AZ support plate. Please follow the
guidelines below.
When working with the angled mount, make sure that it has been installed
correctly. It should be installed as shown in the diagram below.
Make sure that items 1 and 2 are
inserted correctly in the support plate.
Schraegauflage= inclined support
Auflageblech
= support sheet
Frontplatte
= front plate
Gipstrimmer
= model trimmer
8 Setting-up
The HSS-AZ plaster trimmer does not need any other support than the one described in
6.1 installing the angled mount.
10
