Wasp WWS100i, Быстрый старт, Страница: 6 / 12

QSG
4
In order to configure Wasp WWS100i Cordless Pocket Barcode Scanner,
you must familiarize yourself with the setup procedures on the following
pages. The default settings of the scanners are identified on each page
and clearly marked using an asterisk (*). The default settings have been
pre-programmed for the most common barcode configurations. Use
the setup & configuration barcodes to customize the WWS100i Scanner
settings. If you need to configure the Scanner, the default settings will be
overwritten. All the pre-programmed settings are stored permanently in
non-volatile memory.
In order to configure Wasp WWS100i Scanner, two basic steps need to be
followed:
(1) Locate the group that contains the options to be changed.
(2) Scan the barcode representing the option to be changed.
The scanner will sound two beeps.
Setup & Configuration