Wasp WLR8950, Руководство пользователя

Страница: 8 / 36

Chapter 5
6
FACTORY DEFAULT, KEYBOARD CONNECTION AND INTERFACE SELECTIONS
PC (USB or PS/2) * Notebook
The Keyboard Connection is used to program the Wasp WLR8950 Scanners for the type of computer to which it is attached.
*Default
Keyboard Connection
Scan the Auto-Sense Stand Mode barcode to enable the hands-free autosense feature of the WLR8950 Scanners. If you desire to turn
this mode “off,” scan the Trigger Only barcode.
Auto-Sense Stand Mode
Auto-Sense Mode Enable Trigger Only
Magnetic Switch is available after activating Auto-Sense Stand Mode.
• The Magnetic Switch is automatically activated when Auto-Sensing Mode is on.
• To enable Magnetic Switch, the scanner should be paired with an Auto-Sense Stand to perform the Auto-Sensing function.
• When Magnetic Switch is disabled, the scanner will perform the Auto-Sensing function without an Auto-Sense Stand.
Magnetic Switch On
Magnetic Switch Off
Interface Selections
PS2
The Interface Selections barcodes allow you to switch interfaces based on your connection type.
The scanner is designed to switch easily between interface options. To switch from one interface to another, the appropriate cable must
be installed. After changing to a new cable, be sure to reset the interface setting.
USB KB