7
B2000 Installation Guide
2.4 Power Connection
This device is powered by 12VDC. A 12V power supply adapter is provided with the device. Plug the 12V power
supply into the power port at the back of the device (see section 1.2).
2.5 Test After Installation
After installation is complete, perform a test of functionality.
1. Power on the device using the power button (see section 1.2). The green LED should begin to glow.
2. Press the
M
key to enter the device
Main
menu.
3. Use the arrow keys to highlight
Auto Test
, then press the
M
key.
4. Highlight
All Test
, then press the
M
key.
5. After the test is complete, press
ESC
to return to the
Main
Menu. Highlight
User Mng
and press the
M
key.
6. Enroll a new user and card (see the B2000 User Manual for details). Test the device by swiping the card.
7. If the card is not read correctly, delete the enrolled user and card and check the installation procedures. Refer
to
Appendix I – Troubleshooting
for assistance.
Содержание B2000
Страница 1: ...B2000 Installation Guide...
Страница 4: ......
