Wasp B2000, Руководство по установке, Страница: 10 / 16

6
B2000 Installation Guide
Chapter 2 – Device Installation and Wiring
2.1 Wall Mounting
1. Separate the mounting plate from the B2000 by removing the screw at the bottom edge of the clock. A special
screwdriver is supplied.
2. Determine the position of the mounting plate on the wall. The B2000 should be mounted on the external wall
of the door approximately 4 to 5 feet from the ground. After the desired position is determined, cut out an
opening (approximately 1 ½ inch x 1 ½ inch) for cables (see shadowed area on illustration below).
3. Line up the opening of the mounting plate with the newly cut-out opening on the wall, then screw the plate to
the wall.
4. After installation, make sure the mounting plate is tightly secured to the wall.
2.2 Communication Connection
The B2000 can directly connect with a PC through RS232 or Ethernet:
The B2000 can connect with a PC through RS485 network:
The B2000 can connect with a PC through Ethernet network: