17
Wash Programs
1203
Wash program, Hot
After the machine has started and the door
automatically locked, the drain valve will close
and the hot and cold water valves will open to fill
the machine with mixed hot and cold water to the
level determined by the level control.
When this level is reached, both water valves will
close. During filling and then through the wash
program the drum has a reversing rotation.
At the end of the pre-wash, the drain valve will
open, whereafter hot water will fill to the level
determined by the level control. At the same time
detergent from compartment 2 is mixed with the
incoming hot water.
The water level controlled machine will now wash
the fabrics for 6 minutes. The machine is then
emptied.
Cold water is filled to the high level for the first
rinse which lasts one minute, followed by spin
extraction for 30 seconds. After the extraction
comes the second rinse in cold water, ending
with spin extraction, whereafter the third rinse is
started. Fabric softener is automatically admitted
during the third rinse. The fabrics are rinsed in
cold water for two minutes followed by a spin
extraction of four minutes duration. Finally there
is a shake out for one and a half minutes.
HOT
Time Temp. Water
(Min.)
Level
Prewash
3
Warm High
Detergent 1
Drain
1
Mainwash
6
Hot
High
Detergent 2
Drain
1
Rinse 1
1
Cold High
Drain
1
Extract
0.5
Rinse 2
1
Cold High
Drain
1
Extract
0.5
Rinse 3
2
Cold High
Detergent 3
Drain
1
Extract
4
Shake-out
1.5
Total time
24.5
(water fill time
not included)
Fig.
25
25
Содержание Giant W 185
