![background image](http://html1.mh-extra.com/html/wascom/ex-7-es/ex-7-es_operating-and-maintenance-manual_3470667038.webp)
34
Replacement of door lock
1. Remove the retaining screws securing the front panel and slide the
panel downwards until it disengages. Lift it away.
2. Open the door of the machine.
3. Remove the door lock by undoing the two retaining screws and
remove the locking plate (1).
4. Pull the lock outwards at the side of the front trim (2).
5. Transfer the electrical connections from the old locking mechanism to
the new locking mechanism, one at a time.
6. Position the new locking mechanism behind the front trim (3).Position
the striker plate and secure it using the two retaining screws (4).
7. Close the door of the machine and check that the door lock is
working.
8. Engage the front panel, and slide it upwards until it can be retained by
the two screws in the bottom. Fit the two screws (5).
9. Check that the door switch is operating properly by starting the
machine and checking that the door cannot be opened while the
program is running.
0925
51
Mechanical and electrical design
Fig.
51