![background image](http://html.mh-extra.com/html/wascom/emerald-w105es/emerald-w105es_operating-and-maintenance-manual_873583053.webp)
49
Mechanical and electrical design
71
1158
Water level controls
One pressure switch is used to control the correct water levels
during various cycles of the washing program.
Adjustment
All pressure switches are factory-calibrated to meet specific
requirements. The trip level for any one pressure switch can be
changed only within narrow limits because each trip range requi-
res a different set of springs. Call Wascomat's Service Depart-
ment at 516-371-0700 before attempting to adjust the level
control!
Water level
As a guide for checking the level control for proper functioning, the
normal level should be approximately at the bottom of the door
glass. It is primarily the reverse-wash mechanical action of the
washer which gets clothes clean, not the level of water or amount
of detergent. The water levels are set at the factory to get a full
load clean without wasting a drop of water, to save you money
and protect the environment.
Fig.
71