WASAGUN ZZ001 Скачать руководство пользователя страница 5

Страница: 5 / 9

Assembly Instructions

Step 8

Step 9

Step 10

Hx2pc

Bx4pc

Cx6pc

Mx2pc

8:Fix the fitting "Q" on 9 through screw "H".

Please take the plug out of the hole at 4.

Qx1pc

10:Fix 2 and 3 to 1 with screw "C".

1 The hole position at the bottom is for you to choose the installation height according to your requirements.

9.1:Press part "B" from the back of 4 into the hole.

9.2:Press part "B" from the right side of 11 into the hole.

9.3:Align the screws assembled on 7 with holes 11 and 4

and press down to fix them.

Note the correct installation direction of part "B" : the arrow

points upwards. Wrong direction, can't press down to fix.

Rx1pc

Содержание ZZ001

Страница 1: ...ct us by mail info wasagun com 1 2 Screwdriver Assembly Instructions Please keep for future reference End table ZZ001 Dimensions Width 22 8inch Depth 11 4inch Height 25 6inch Assembly Tool Required Read all instructions before assembly and use KEEP INSTRUCTIONS FOR FUTURE USE 1 ...

Страница 3: ...orresponding to 7 and then fix it with screw H 2 Insert the other end of P into the corresponding hole of 8 and then fix it with screw H P 3 Insert part A into the corresponding hole 7 4 1 Fix both ends of 4 and 6 through fitting K with screw I 4 2 Fix the accessory O on the hole in the middle of 6 through screw H 4 3 Fix 5 to 4 through screw G Kx2pc Gx2pc Rx1pc 3 ...

Страница 6: ... assembled in the same way as the previous step 11 1 The fitting M is fixed at the bottom of 1 by rotating 1 12 1 Fix drawer to 2 with screw D 12 1 Fasten drawer to 1 with screw C Since the drawer lid on the left can be flipped open this only needs to be secured on the right 2 1 Rx1pc Rx1pc 6 ...

Страница 7: ...x4pc J x4pc 13 1 Fix screw F on the two holes at the rear top of 1 13 2 Fix screw C on the two holes at the top of the front of 1 13 3 Fix screw J on the front inner hole of 1 C C C J J J 14 There are two ways to open a finished product As shown above Rx1pc 7 ...