manualshive.com logo in svg

WÄRTSILÄ SCENESCAN, Руководство пользователя, Страница: 67 / 82

Поделиться
Скачать
WÄRTSILÄ SCENESCAN Скачать руководство пользователя страница 67

67

94-0561-D

The SceneScan system provides positional data messages to the vessel’s Dynamic 
Positioning (DP) system, for correct functionality, the format and behaviour of this 
output stream needs to meet the requirements of the DP system.

The current DP configuration settings are displayed on the DP Config tab of the 
SceneScan Service Interface, along with the most recent message emitted. See DP 
Message Types (page 70) for details of each available message format and DP Feed 
Behaviour (page 66) for details about each of the function of the Keep Feed Enabled 
and Allow Zero Strings parameters.

Modifying the DP Configuration

1.  Click on the Resume button if the Sensor is suspended.
2.  Ensure that no tracking is in progress.
3.  Click on the Take Command button if the SceneScan Service Interface is not 

already In Command.

4.  On the DP Config tab, click on the Edit button.
5.  Amend the settings as required.
6.  Click on Apply to save the changes or on Cancel to discard.

10.5

Configuring the SceneScan System   

10

Dynamic Positioning Feed Configuration

Содержание SCENESCAN



















































































Отзывы:

Нет отзывов