WÄRTSILÄ JOVYTEC P Series, Руководство по эксплуатации

Страница: 12 / 38

Wärtsilä JOVYTEC P 700VA
– 3kVA
BAX 3345 - 12 -
JOVYTEC P 2000
Output power cos

0,7 ind. 2000VA / 1400W
Network supply
Voltage
230V
Input voltage ranges
168V - 276V (0-100% load)
140 - 159V (0-70% load)
120 - 139V (0-40% load)
Current with standard charger 7,7A
Current with additional charger 10,1A
Frequency 50Hz ±3Hz or 60Hz ±3Hz
Phase Single phase
Power Factor 0,98
External fuse protection D01/10A
Battery
(installed in battery pack inside the
ups)
Direct current link voltage 72V
Backup time 8min. at 100% load 13min. at 80% load 28min.at 50% load
Type Maintenance free, closed lead acid batteries
Charging time < 8 Stunden for 90% charged battery
Output
Voltage 230V Standard (208V / 220V / 240V selectable at the panel)
Frequency Automatic adjustment by ups
Power factor
cos

0,7 ind.
Phase Single phase
Distorsion factor < 3% at linear load
Overload behaviour
100 to 125% for 60 seconds
125
– 150% for 10s
Crest Factor 3 : 1
Efficiency
AC to AC 88 - 98% according to the operation mode
Switch over behaviour
Power failure 0ms
Overload switching Automatic overload switching by the ups
Noise level
At a distance of 1m < 50dB(A)
Environment
Temperature
0°C to 40°C
+15 … +25°C (recommended)
Air humidity 0% to 95%, non condensing
Storage at
…
20°C (recommended) with Battery
-20°C to 50°C without Battery
Interfaces
RS 232-Interface
Optional:
USB-Interface
Relay card
AS/400 - Adapter
SNMP - Adapter
Supports power management and diagnosis such as BATTERY
LOW, UPS ON/OFF
Software is compatible with operating systems such as: Windows
95/98/NT/2000/XP, Novell, Unix, etc current operating systems.
Dimensions
UPS Device
Width 225mm
Depth 425mm
Heights 360mm
Weight UPS
approx. 16,2 kg
Weight UPS incl. Battery approx. 32,2 kg
Scope of delivery Hardware/Software
UPS unit JOVYTEC P 2000
Manual BAX 3345E
Interface cable
Software UPSMON