WARRIOR WEP8181CS, Руководство пользователя

Страница: 10 / 37

Specific safety instructions for cordless tools and charger
WARNING
:
Always remove the battery from your machine to assemble or disassemble parts,
making adjustments and sharpening, cleaning or when you do not use your tool. This will reduce the
risk of unintentional starting of the machine which can cause serious injury.
- Do recharge the battery of your machine with the charger specified by the manufacturer. A
charger that is suitable for a certain type of battery can cause a fire when used with another
type.
- The battery should not be crushed. If crushed, it should not be heated or incinerated, Do not
get it short-circuited or disassembled, or immersed in any liquid.
- Only a specific type of battery can be used with a cordless machine. Use of any other
battery may cause a fire.
- When the battery is not in use, keep it away from metal objects such as paper clips, coins,
keys, screws, nails or other objects that connect the contacts between them. The short-
circuit may cause fire and / or explosion of it, and cause severe burns and injury.
- Avoid contact with fluid from a leaking battery because of overheating or other factors. If this
happens, flush the affected area of the body with water, and in case your eyes are affected,
seek medical attention immediately.
- Due to the heat generated during charging, the charger should not be used on a
combustible surface or in a flammable environment.
- Never block the air slots of the charger.
- Never disassemble the machine by yourself. An incorrect reassembly can cause a risk of
electric shock or fire.
- Unplug the charger when the machine is not in use or when you are cleaning the machine.
- Use only approved extension cords and in perfect condition.
- Make sure the ventilation of the place is enough when charging. Poor ventilation of the
charging can cause a temperature of excessive use, causing malfunction of the charger.
The higher 40 ° C should be avoided.
- The charger can not be put in closed cabinets or near heat sources such as radiators or
sunlight because it will undergo increased heat which may cause a fire or damage
the charger.
- If you do not use the battery for a long time, remove it from the charger and unplug it.
- Do not attach anything on the charger with rivets or screws. Rivets or screws may make
ineffective on the insulating housing. An adhesive label is better, without blocking the
ventilation slots.
- Charge only original batteries.
- If the power cord is damaged, make it replaced by an authorized service center to
avoid risk of accidents.
WARNING : To avoid the risk of damage and injury, make sure the operating voltage of the charger,
and never attempt to recharge non-rechargeable batteries.
B
ATTERY CHARGER
Specification:
Charger: WEP8181CS
Input: 120-240VAC, 50/60Hz Max. 3A
Output: 63VDC. Max.4.5A
Weight: 2.6 lbs (1.2kg)
CHARGING PROCEDURE (See Figure 1 )
NOTE : The battery is not shipped fully charged. It is recommended to fully charge before first
10