OPERATION
12
WARNING
Read and understand entire Operator's Manual for each optional attachment used on this
power head and follow all warnings and instructions. Failure to follow all instructions may
result in electric shock
，
fire and/or serious personal injury.
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious
personal injury
WARNING
Any contact with the attachment cutting head can result in burns and/or other serious
personal injury.
WARNING
Read the safety information for safe operation when using a blade attachment and refer to the
safety rules and instructions in your attachment manual. Never use a brush cutter attachment with
this electric powerhead. Improper operation of a blade or any attachment could result in serious injury
.
LOCK-OUT BUTTON
(See Figure 8.)
The lock-out button reduces the possibility of accidental starting. The lock-out button is located
on the handle beside the switch trigger. The lock-out button must be depressed before you pull
the switch trigger. The lock resets each time the trigger is released.
STARTING AND STOPPING THE TRIMMER
(See Figure 8.)
To start:
·
Insert the battery pack into rear handle.
• Depress the lock-out button and squeeze the switch trigger.
•
T
he speed will be increased according to the load, and the LED will show the working
state.
To stop:
• Release the switch trigger.
OPERATING THE TRIMMER (See Figure 9
）
Hold the rear handle with your right hand on the rear handle and your left hand on the auxiliary
handle. Keep a firm grip with both hands while in operation. Rear handle should be held at a
comfortable position with the rear handle about hip height.
Lock-out button
Switch trigger
Fig.8
