Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
6.
Reinstall headlight surround/grill.
7.
Visually align the bumper by lining up the top edge of the bumper with the bottom edge of the
grill. Once you have the horizontal and vertical spacing to your liking, tighten the (8) mounting
nuts to 48 ft lbs.
8.
Going back to the winch plate frame brackets; insert the 3/8” x 1-1/4” hex bolts with split
washers through the brackets and into the corresponding oblong holes in the top of the winch
plate to locate the brackets position on the frame. Thread on the nuts and washers, but do not
tighten at this time. Utilizing a marker pen or scribe, mark the mounting holes on the side of the
frame. Use a center punch then drill out the holes to 11/32”. Use the 3/8” x 1” self-tapping bolts
included with the bumper hardware and tighten the winch plate brackets to the frame. Now
tighten the bolts on the other end of the bracket that go through the winch plate.
9.
You should now have the winch and fairlead bolted to the bumper, and the bumper securely
installed on the vehicle. Double check that all bolts are properly tightened.
10.
Complete the installation by running your winch power and ground cables through the grille and
into the engine bay and connect them to the positive and negative terminals on your battery.
Install your d-ring shackles and winch hook. (if applicable)
If you need further assistance installing your product, please contact us by email at
or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS
