INTIG 250 PULSE DC Pulse Argon Welding Machine
4.
it welding current from its start current.
PEAK CURRENT :This LED indicates the Welding current during
5.
welding & arc welding normal output state.
PULSE FREQUENCY :This LED indicates the operating
6.
frequency of PULSE output ( applicable in PULSE MODE ).
DUTY CYCLE :This LED indicates the ON / OFF TIME OF pulse
frequency output.
BASE CURRENT :This LED indicates the base current during
7.
off time of pulse output ( Applicable in PULSE MODE).
DOWN SLOPE :This LED indicates the time taken for machine to
reach its Arc current from its welding current.
STOP CURRENT : This LED indicated the current value before the are
welding quenching.
POST FLOW
:This LED indicates the continues flow timing after
welding.
PROCESS
:This SWITCH is used for selection of MMA , TIG Or PULSE
WELDING.
MODE
:ThisSWITCH is used for selection of 2 Track Or 4 Track welding.
VOLT/AMP
:This is digital display for voltage and current display.
