Warner Shelter Systems Limited MQ2040T, Руководство по сборке

Страница: 8 / 16

Warner Shelter Systems Limited
PAGE 8
Step 12
• After raising one side, move Drop Sheet
towards the lower half of the frame to
expose the Cable intersection.
CENTREPOLE INSTALLATION
• Install the Flag on the Centrepole
• Insert the Centrepole 9 through the
centre socket of the Tent Top.
Step 13
• Remove Drop Sheet and fold keeping
clean side in.
Step 15
Step 16
Step 14
• Install the remaining Posts, inserting the Corner
Posts first and then the Side Post.
DROP SHEET
Lock pin
3
Corner 90°
• Lock Posts in place
using the Lock-Pins 10 .
1 2 3 4 5
..\graphicshome\Marquee\Manuals\MQ2040T\MQ2040T Manual 2007.FH11
9
Centrepole
* If one must step on fabric, remove shoes to avoid soiling or damaging the Tent Top.
Flag
• Place the Centrepole lower end on the top
Cable and slide it toward the Cross Cable
intersection, wedging the Centrepole
between the cover and the cables.
• At the intersection, push down bottom cable
while pulling up the top cable to set both
cables directly below the Centrepole sleeve.
• Secure the Centrepole to the
cables using the Lock-Pin.
Top Cross
Cable
Bottom Cross
Cable
Centrepole
Sleeve
Lock Pin
Cross
Cables