The transmitter starts default configuration
Transmitter boot. The progress bar e
select, short press the knob to confirm.
Last Config Last configuration,
Default config default configuration, the system default frequency 98MHZ / power O
external modulation / audio pre
PLL lock wait
Waiting time 2-10 seconds.
Main interface
F: Current frequency POW: Current po
DRIVE: Amplifier Push TEMP: Amplifier Temperature
Short press the knob to enter the menu settings, turn the knob to s
Menu 1 Frequency setting
Short press the knob to enter the frequency setting.
Current frequency: current frequency
configuration
The progress bar enters the selected setting in about 10 seconds. Turn the knob to
select, short press the knob to confirm.
Last configuration, the latest shutdown configuration.
default configuration, the system default frequency 98MHZ / power O
external modulation / audio pre-emphasis 0 / volume gain 0dB.
Current power VSWR: Standing wave ratio L Left channel level
Amplifier Temperature MOD Modulation Level R
Short press the knob to enter the menu settings, turn the knob to select the desired setting menu.
requency setting
Short press the knob to enter the frequency setting.
current frequency
about 10 seconds. Turn the knob to
default configuration, the system default frequency 98MHZ / power ON /
Left channel level
Right channel level
elect the desired setting menu.
