Warner Electric • 800-825-9050
P-273-5 -WE • 819-0529
7
Section D: Mounting the Brake to a Motor
(20, 20FBB)
The brake module (20 or 20FBB) can be mounted
directly to a motor .
1 . A hardened key is provided with the mounting
hardware for the module (20 or 20 FBB) . Insert
this key onto the motor shaft and prick punch the
end of the motor shaft keyway to prevent the key
from sliding out .
2 . Align the motor shaft and key with the mating
shaft hole and key slot in the brake module
(20 or 20FBB) . (Figure 8)
3 . Secure the brake module (20 or 20FBB) to the
motor C-face with the four (4) long hex head
capscrews provided . Tighten the four (4) bolts
alternately to ensure even alignment of the
module . Tighten them to 30-35 foot pounds .
Section E: Installing the Motor Mount
Bracket (10-20, 10-20FBC, 10-40, 20, 20FBB)
A Motor Mount Bracket can be installed on the
output end of a module (10-20 or 10-20FBC, 20, 20
FBB) or (10-40) to provide a foot mounting for the
complete assembly of an Electro-Module and C-face
motor .
Optional Motor Mount Kit,
Warner Electric part numbers:
EM-50/100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5370-101-078
EM-180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5370-101-079
1 . Mount the bracket to the face of the Electro-
Module underneath the Module and Motor
as shown in Figure 9 . A pilot diameter on the
Electro-Module mates with a pilot diameter on
the bracket .
2 . Secure the motor bracket in place with four (4)
short bolts and washers provided . Tighten to
18-22 foot pounds .
Section F: Installing the Base Mount
(20-30, 20FBC-30, 30-40)
Model (20-30 or 20FBC-30) and (30-40) Electro-
Modules are designed to be base mounted as shown
in Figure 10 .
Optional Base Kit,
Warner Electric part numbers:
EM-50/100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5370-101-004
EM-180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5370-101-002
Figure 8
Figure 9
