background image

WARN INDUSTRIES  *  BASIC GUIDE TO PLOWING

1

Plow Operator's Guide - Basic
Guide to Plowing

TABLE OF CONTENTS:

General safety precautions ............................................................................... 2-5

Plow Basics ...................................................................................................... 6-9

How the Plow Works ..................................................................................... 10-11

Plow Accessories & Enhancements ................................................................. 12

Before you Plow ............................................................................................ 13-16

Plowing ......................................................................................................... 17-18

Maintenance/Storage ......................................................................................... 19

Final Comment .................................................................................................. 19

WARN INDUSTRIES  

OFF-ROAD PRODUCTS

12900 S.E. Capps Road

Clackamas, OR 97015-8903  USA

Customer Service: 1-800-543-WARN (9276)

Fax: 1-503-722-3000

www.warn.com

Every plowing situation has the potential for personal injury. In order to minimize that risk, it
is important that you read this Basic Guide carefully, familiarize yourself with the operation of
your plow before having to use it, and be constantly safety oriented. In this Guide, we will set
forth many of the basic rules of safe plow operation. However, because every plowing
situation is different, your constant good judgment and consistent focus on safety are of
great importance.

Содержание ProVantage




















Отзывы: