27. Route the red power wire and the black ground wire between the vehicle frame and the cooling fan
shroud to the cooling fan wire harness. The cooling fan harness is wrapped in convolute tubing.
NOTE:
The winch power and ground cables will be routed to the battery on the RH side of the engine
compartment.
INSTALLATION (Continued)
26. Connect the 18 gauge ground wire (via bullet terminal) from the control pack assembly to the winch
motor ground wire.
NOTE:
Ensure the control pack assembly is positioned on the outboard side of the LH frame rail.
2020-CMY Super Duty
Winch
17
Page 17 of 26
SKLC3J-19E536-AA
© Copyright Ford 2020 FoMoCo
