Techline 1-800-367-3788
Page 1 of 3
IS-M-1821-SD 031221
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD PERFORMANCE PARTS © Ford Motor Company 2020
Ford Factory Shop Manual purchase options
M-1821-SD
Model 2020
→
Super Duty Winch by Warn
03.12.2021 UPDATE
INSTALLATION INSTRUCTION
STEP 33 Bumper re-installation
Summary of Update Procedure
Remove and discard the 2 center Bumper Spoiler bolts
remove & save associated j-clip nuts
Replace bolts with a low profile M6 cap head, Ford
Standard Part W711581S450B.
Insert from topside
Re-install j-clip nuts on to Spoiler
This improves winch roll winding by allowing the winch
rope to pass freely over the spoiler bolt.
Image shows spoiler bolts as installed relative to the winch rope spool.
