Warn A2000, Руководство по обслуживанию

Страница: 11 / 45

11

MOTOR CAP ASSEMBLY
REPLACEMENT
 On the top of the motor case there is an
index, which must mate to the index on the
cap assembly. The rotation of the motor
should be the same position as when
removed.

Replace cap springs in keepers, (a
template will help hold brushes in correct
position.)
 Place cap on top of armature aligning
index marks. Drop bolts through cap
holes, matching up with the motor housing
holes. Flip unit over with weight of motor
down.
 Motor bolts will show through inside
housing. Place one nut, flat side out,
inside square nut keepers and finger snug
each of the two motor bolts into these nuts.

Turn unit over and tighten bolts to 18 ft lb.
Do not over-tighten as it can compress and
damage material.
Index Mark