©2016 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
98271A1
7. Remove the two small metric bolts from side of the bumper.
Repeat for other side.
8. Un-snap the plastic cover on top of the bumper in order to
gain access to the upper bolts holding the frame brackets to
the bumper.
9. Lift up the top plastic piece, located above the bumper
frame brackets, to expose bolts.
10. Remove necessary hardware to free bumper from frame
bracket.
11. Reinstall bumper bracket/hitch back onto vehicle the same
way it was removed by reinstalling the bolts previously
removed in Step 2.
Tighten hardware now. Refer to torque specifications on
page 2.
I N S T A L L A T I O N I N S T R U C T I O N S
Figure 6
Figure 7
Un-snap
Figure 8
Figure 9
