Warn 89990, Руководство по установке

Страница: 1 / 18

Warn Industries PAGE 1 89786 Rev. A0
INSTALLATION INSTRUCTIONS
For Mounting a Warn Winch on
Multi-Mount Kit No. 89990
Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided
installation and operating instructions and other information on labels and in this guide. This information alerts you to potential
hazards that could hurt you or others. It is not possible to warn you about all potential hazards associated with this product, you
must use your own good judgment.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT
DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS
BEFORE INSTALLING AND OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid personal injury or
death.
WARNING and CAUTION are signal words that identify the level of hazard. These signal words mean:
WARNING signals a hazard that could cause serious injury or death, if you do not follow recommendations.
CAUTION signals a hazard that may cause minor to moderate injury, if you do not follow recommendations.
This guide uses NOTICE to call attention to important mechanical information, and Note: to emphasize general information
worthy of special attention.
Caution
Impact Hazard
Failure to observe these instructions could lead to minor or moderate injury.

Always use proper posture / lifting technique or get lifting assistance while handling and installing product.

Always use appropriate and adequate care in lifting components into place.

Always insure components will remain secure during installation and operation.
Notice
Equipment Damage

Always refer to the I nstallation Instructions and Operator’s Guide, supplied in the winch kit, for
all wiring schematics and specific details on how to wire this WARN product to your vehicle.
WARNING


INJURY HAZARD
Failure to observe these instructions could lead to severe injury or death.



Always verify area is clear of fuel lines, fuel tank, brake lines , electrical wires, etc when drilling.

Never short battery terminals with metal objects.

Always use extreme caution when drilling, cutting and trimming during fitting.

Always remove jewelry and wear eye protection.

Never lean over battery while making connections.

Never route electrical cables:
o
Across any sharp edges.
o
Through or near moving parts.
o
Near parts that become hot.

Always insulate and protect all exposed wiring and electrical terminals.

Always take time to fully read and understand the Installation Instructions and Operator’s Guide included with this product.

Always inspect the quick connect polarity on the cable from the battery AND the cable from the winch.

Never operate this WARN product with damaged or missing parts.

Never install a winch with a capacity over 10,000 lbs (4536 kg)

Never exceed 10,000 lbs (4536 kg) pulling force.