©2012 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
7
88331A1
O P E R A T I O N
Attaching the plow to the vehicle
1. Stage the plow assembly on level solid ground. See Plow
operator guide “Installing the Plow” for more information.
2. SLOWLY drive the vehicle up to the plow assembly with the
vehicle as square to the plow as possible.
3. Turn off the vehicle and set the parking brake. Lift the plow
mount flange end of the push tube assembly up to the plow
mount on the vehicle. Insert the plow mount flange into the
plow mount receiver.
4. Double check that the plow is fully engaged with the
alignment pucks on the plow mount flange. The alignment
pucks should be fully seated into the plow mount cradle
feature.
5. With both alignment pucks seated into the plow mount the
retaining pins can be inserted. Once inserted the retaining
clips on the pins can be clipped onto locking tab on plow
mount. See Plow operator guide “Installing the Plow” for
more information.
6. With both retaining pins secure, pull out the line from the
winch.
7. Pull the retaining pin on the plow assembly that is securing
the pulley assembly. With the pulley assembly loose, place
the pulley assembly over the winch line and reinstall the
pulley assembly onto the push tube assembly securing
the pulley assembly with the retaining pin. See “Double
Line Rigging” in the Plow Lift section of the Plow Operators
Guide.
8. Connect the termination strap to the front bumper. The loop
of the strap should be placed as high as possible on the
bumper. When using plow with Warn Front Bumper, install
5/16” U-bolt and hardware to Warn bumper. The U-bolt will
provide a connection for termination strap.
Install Plow Mount Flange - Hardware included in plow push tube kit.
Plow Mount Flange
