©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
88126A0
I N S T A L L A T I O N I N S T R U C T I O N S
4. Place the left hand bracket over the frame and line the
holes up with the plow mount. Place the three remaining
hex head bolts along with three flat washers up through the
three holes. Then put three flat washers along with the lock
nuts on the bolts. See figure 4
5. Tighten the bolt with the large black washer first. Then you
can tighten the rest of the fasteners at this time. Try to
tighten the rest of the fasteners evenly, and not so much
that you distort the mount to much. See figure 5.
Figure 4 -
Mark Plow Mount Slots
Figure 5 -
Remove Plastic Skid Plate
M A I N T E N A N C E / C A R E
•
Inspect all metal parts on the plow, plow mount, and related hardware. Replace all parts that appear rusted or deformed
prior to use.
•
Inspect all nuts and bolts on the plow, plow mount, and related hardware prior to each use. Tighten all nuts and bolts that
appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced immediately.
•
Check all cables prior to use. Replace cables that are worn or frayed.
•
Check all moving and rotating parts. Remove debris that may inhibit the part from moving freely.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL
SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
