WARN INDUSTRIES
PAGE 4
71874A2
Figure 4 U-Bolt Installation
Figure 3 Mount winch to mounting plate
1.
Attach winch (F1) to winch mounting plate (E1) using
M8 hardware found in winch kit. See Figure 3. Tighten
M8 hardware to torque specifications found on page 2.
2.
Place assembled winch (F1) and mounting plate (E1) on
frame, being sure that winch motor is to the left when
standing in front of ATV.
Attach mounting plate E1 to frame using u-bolts (D1
and D5), 1/4 and 5/16 nuts (D4 and D8), 1/4 and 5/16
lock washers (D3 and D7) and 1/4 and 5/16 flat washers
(D2 and D6). Do not tighten at this time.
Tighten all 5/16” nuts (D4) to torque specifications on
page 2.
3.
This completes winch mounting.
V. WINCH MOUNTING PLATE INSTALLATION
F1
E1
D1, D2, D3
and D4
D5, D6, D7 and D8
Clamp edge of plate 2
1
/
2
inches from edge of bolt
