WARN INDUSTRIES
PAGE 5
79235A0
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Figure 4
Figure 5
INSTALLATION CONT.
5. Using the 30mm M8 bolts (B1), washers (B2),
spacers (B3) and M8 flange head nuts (B4),
continue to connect the mount to the frame rail
flanges (Figure 3 and 4).
6. Go back and securely tighten all four bolts from
steps 4 and 5 referring to the recommend torque
guidelines. If no winch installation necessary
please skip to step 9.
7. Slide winch through the side opening the same
way the plow mount was put into place (Figure
5). Allow extra slack in the winch rope to feed it
through the back of the roller fairlead (Figure 6).
Let the winch rest on top of the plow mount.
NOTE: Please see the WARN winch installation
instructions to install the roller fairlead.
8. Bolt the winch onto plow mount using the
provided bolts in the WARN winch kit. Tighten
bolts to recommended torque guidelines.
Figure 6
