WARN INDUSTRIES
PAGE 8
75829 A0
Figure 7: Cutout of inside of plastic bumper
Once the plastic bumper is trimmed to fit the main frame brackets, insert the black 7/16” x 2-1/2” long
round head bolts into the front two holes of each main frame bracket and insert it into the plastic bumper as
shown in
Figure 8
. Then install the steel portion of the factory bumper to plastic portion using the 8 bolts
removed earlier. Torque the factory bolts to 45 ft/lbs.
Figure 8: Install 7/16” Round Head bolts into frame bracket prior to installing steel bumper
INSTALL 2 ROUND HEAD
BOLTS INTO FRAME
BRACKET PRIOR TO
INSTALLING STEEL
PORTION OF BUMPER.
