WARN INDUSTRIES
PAGE 12
75829 A0
Re-install the fog light wire loom to the frame locations.
Re-install the front splash pan skid plate using the factory hardware.
Plug the fog light wiring to the lights.
THE WINCH MOUNTING PLATE INSTALLATION IS NOW COMPLETE. PROCEED TO SECTION IV
TITLED “MAINTENANCE/CARE”.
VI. MAINTENANCE/CARE
1.
Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware
that appears rusted or deformed.
2.
Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all
nuts that appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3.
Check all cables prior to use. Replace cables that look worn or frayed.
4.
Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
VII. TROUBLE SHOOTING
WARNING
FAILURE TO SECURELY TIGHTEN ALL BOLTS ON THE WINCH PLATE, WINCH, AND
FAIRLEAD CAN RESULT IN PRODUCT FAILURE WHICH MAY RESULT IN VEHICLE
DAMAGE AND OPERATOR INJURY OR DEATH. DOUBLE CHECK THAT ALL BOLTS ARE
SECURELY TIGHTENED PRIOR TO USE.
WARNING
PERFORM REGULAR INSPECTIONS ON THE WINCH, WINCH MOUNT, AND
RELATED HARDWARE. NEVER OPERATE THE WINCH WITH DAMAGED OR
MISSING PARTS. FAILURE TO FOLLOW THIS WARNING MAY CAUSE VEHICLE
DAMAGE AND OPERATOR INJURY OR DEATH.
