Warn Industries
Page 2
67767A1
INSTRUCTIONS:
1.
Remove the side cowlings from each side and then remove the nut clips
that are attached to the cowlings, see figure 1. Nut clips can be discarded
at this time, side cowlings will be reused.
Figure 1
2.
Remove the top two fasteners on both sides of the ATV and discard, see
Figure 1.
3.
Place ¼-20 J-clips into positon on frame with nut behind frame as shown in
Figure 2.
Remove side cowlings from
both sides
Remove fasteners from both
sides
