WARN INDUSTRIES
PAGE 2
39526 Rev B1
PARTS LIST:
1. Frame Mounting Bracket Installation:
Before installing the Frame Mounting Bracket, remove the “break-off” portion as shown in Figure #1. This
piece is only use on the Honda model 300 as a spacer, it is not use on this Honda 450 application, so discard
it.
FIGURE #1: REMOVING THE “BREAK-OFF” PIECE
CAUTION
REMOVE THE “BREAK-OFF” PORTION FROM THE MOUTING BRACKET. IF THIS IS NOT
DONE, DAMAGE TO BIKE CAN OCCUR IF THIS PIECE BECOMES TWISTED AND THEN GETS
SNAGS OR CAUGHT ON SOMETHING ON THE GROUND AS THE BIKE IS TRAVELING.
Under the frame, raise the Frame Mounting Bracket into position. Push the one 5/16” U-bolt down and over
the “left”, outside frame tube and into the frame bracket, as shown in Figure #2 and using the holes as
PART NO.
QUANTITY DESCRIPTION
Mounting kit parts:
1827
1
3/8-16 x 1” Hex Bolt
2002
4
5/16” Nylock Nut
6725
2
1/4" Nylock Nut
6779
1
3/8” Nylock Nut
35391
2
J-Bolt
39550
2
5/16” U-Bolt (5/16 x 1 3/8 x 2 3/16)
39522
1
Frame Mounting Bracket
62845
1
J-Bolt
Mount
