©2016 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
106748A0
I N S T A L L A T I O N I N S T R U C T I O N S
Figure 2
Figure 3
1. Remove all other accessories that may interfere with plow
and winch mounting.
2. Slide plow mount bracket (A1) over the front winch mount
and align the two front mounting holes.
3. Locate the spacer plate (A6) and align over the two rear
holes in the factory winch mounting plate.
4. From underneath the plow bracket, install two M8 x 40mm
bolts (B6) with M8 flatwasher (B2) through the two most rear
mounting holes of the plow bracket and through the two
recessed holes in the frame.
5. Secure with two M8 flat washers (B2) and lock nuts (B3).
Refer to exploded view for detail on page 3. Do not tighten
completely to allow for adjustment.
Figure 1
A1
A6
B6, B2,
B3
