©2016 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
106748A0
I N S T A L L A T I O N I N S T R U C T I O N S
9. From the side of the vehicle, slide the winch on top of the
fairlead bracket, aligning the winch feet with the mounting
holes of the fairlead bracket and winch mount.
10. From underneath the plow mount insert four M8 x 30mm
bolts (B5) and lock washers (B7) through the access holes of
the winch mount and into the winch feet. Tighten hardware
to torque specifications on page 2.
11. With winch in freespool (disengage clutch), feed the winch
rope through fairlead opening.
NOTE: For synthetic winch
rope applications, slide the abrasion sleeve on before
installing hook.
12. Install hook/hook strap combo to rope using clevis and
cotter pin.
13. Install the termination strap (A5) to the plow mount’s
attachment point.
14. Install plow flange (A3) to plow mount using included
retaining pins (B4).
Image showing mount off vehicle for
clarity purposes, refer to exploded view on page 3 for more
detail.
15. Complete your plow installation per your plow system
installation instructions.
Your installation is complete.
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2. Inspect all nuts and bolts on the winch, winch mount and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
M A I N T E N A N C E / C A R E
Figure 7
