©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
106395A0
I N S T A L L A T I O N I N S T R U C T I O N S
9. Secure top of the winch mount assembly to vehicle using
the two M10 bolts (B1) and lock nuts (B2).
10. Secure the bottom of the winch mount assembly using the
four hex head factory bolts (
removed in step 4
).
11. Reinstall push pull fasteners.
12. Reinstall front plastic and install face plate (A2) using factory
hardware in step 1.
15. Tighten
ALL
hardware at this time to torque specification on
page 2.
16. Complete your wiring per your winch installation
instructions supplied with your winch.
Figure 8
Figure 9
M A I N T E N A N C E / C A R E
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
B1 & B2
Factory hardware
Figure 9
