Warn 106204 Скачать руководство пользователя страница 5

Страница: 5 / 6

106395A0

I N S T A L L A T I O N I N S T R U C T I O N S

4. Remove the four center hex head bolts securing bumper

bracket and bull bar to vehicle and remove total assembly

from the vehicle and set aside.

NOTE: Retain bolts for later

use.

5. Remove bull bar from bumper bracket and set aside.

NOTE:

Retain bolts for later use.

6. Attach your bull bar to the winch mount, using the factory

hardware.

7. Install your fairlead to the winch mount (A1) using hardware

supplied in the winch kit.

7. Slide your winch into the winch mount (feet up position).

NOTE: This will make the winch clutch handle on the

passenger side of the vehicle when mount is installed on

vehicle.

TIP: We suggest installing your winch motor cables before you

install the winch mount assembly to the vehicle.

8. Secure winch to mount following winch installation

instructions.

Figure 5

Figure 6

Figure 7

Содержание 106204

Страница 3: ... and theWARN logo are trademarks ofWarn Industries Inc 3 106395A0 P A R T S L I S T ITEM PN DESCRIPTION QTY A1 106278 WINCH MOUNT 1 A2 106280 FACE PLATE 1 ITEM PN DESCRIPTION QTY B1 93078 M10 HEX HD BOLT 2 B2 69807 M10 NYLOCK NUT 2 ...

Страница 4: ...C T I O N S 1 Remove the center front plastic panel from bumper by removing the four torx head screws Retain hardware for reassembly 2 Remove the two torx head holding side corners of bumper to frame Retain hardware for reassembly 3 Remove the two push pull plastic fasteners Retain hardware for reassembly Figure 2 Figure 4 Figure 3 ...