©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
8
106092A0
I N S T A L L A T I O N I N S T R U C T I O N S
22. Reattach the inner structure support to the vehicle, using
stock hardware.
23. Place the new bumper into position, aligning the
mounting slots with the clip nuts on the inner bumper
support.
24. Install the four stock torx head bolts (two each side).
25. Cover holes with supplied plugs (A6).
26. From the inside the bumper, install six stock hex head
bolts into the clip nut locations (each side).
NOTE:
Bumper shown off for clarity purposes.
