©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
106092A0
I N S T A L L A T I O N I N S T R U C T I O N S
1. Disconnect the rear bumper electrical harness that is
located along the inside of the drivers side frame rail
next to the spare tire.
2. Remove the license plate light from housing by
depressing the clip on the top (each side).
3. Remove outer bulb housing from bulb and carefully pull
bulb out through the rear of the bumper.
TIP: Reinstall
bulb housing over bulb for protection.
4. Remove the three bolts on each side of the trailer hitch/
bumper reinforcement that are retaining the bumper to
the vehicle.
Retain bolts for later reinstall.
Figure 1
Figure 2
Figure 3
Remove
