©2019 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
105724A0
I N S T A L L A T I O N I N S T R U C T I O N S
17. Install three M8 bolts (B1) and washer (B2) through the skid
plate and bumper shell mounting holes. Secure with three
washers (B2) and lock nuts (B3).
18. Install your fairlead to your fairlead plate (A2) using
hardware in your winch kit.
19. Line up fairlead plate with mounting holes on top of
bumper mount.
20. Place the winch on top of the fairlead plate.
21. For ease of installation, we recommend attaching your
power cables to your winch before installing the winch
to the bumper mount. Follow your wiring installation
instructions found with your winch.
22. Reach in through the side or the rear of the bumper and
thread the four
LONGER
M8 bolts supplied in this kit, up
through bumper mount, fairlead plate and into winch feet.
WARNING
Do not use the M8 bolts supplied in your winch kit, they will
not be long enough.
23. Torque all hardware per recommendations on page 3.
B1, B2, B3
Figure 8
Figure 9
Figure 10
M A I N T E N A N C E / C A R E
1.
Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2.
Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3.
Check all cables prior to use. Replace cables that look worn or frayed.
4.
Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
