©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
102768A1
4. Install the lower skid plate bracket (A2) using the supplied
10mm bolts (B1) and locking nuts (B2) hardware. Do not
tighten completely at this time.
5. Place winch on mounting plate.
6. Secure winch in place by installing the two
rear
winch bolts
(B3). Do not completely tighten at this time.
7. Lift lower skid plate bracket up to meet the winch mount.
8. Insert the
front
winch bolts (B3) through lower skid plate
bracket, winch mount and into winch.
9. Tighten
ALL
hardware.
TIP: There are bolt access holes
through the lower skid plate bracket to reach rear winch
mount bolts.
10. Lift the plastic skid plate up to meet the bottom of the lower
skid plate bracket.
11. Attach the plastic skid plate using the factory hardware.
12. Tighten ALL hardware.
I N S T A L L A T I O N I N S T R U C T I O N S
Figure 5
Figure 6
Figure 7
Figure 8
A1
B1 & B2
Winch Hardware
Front Winch Hardware
Rear Winch Hardware
Access Holes
