©2016 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
101436A0
I N S T A L L A T I O N I N S T R U C T I O N S
1. Remove the factory skid plate by removing the two lower
hex head bolts, six torx head screws (three on each side -
holding tubes to skid plate) and two (one each side) hex
head side bolts.
Figure 2 shows skid plate removed.
2. Place winch on top of winch mount (A1).
3. Line up winch feet with the four holes on mount.
4. Secure winch to winch mount following instructions and
using hardware found in your winch kit.
Figure 1
Figure 2
Figure 3
Lower bolts
Torx screws
Side bolt
A1
Side bolt
