©2016 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
2
101436A0
C A U T I O N
MOVING PARTS ENTANGLEMENT HAZARD
Failure to observe these instructions could lead to minor or moderate injury
•
Always
take time to fully read and understand the installation and Operations Guide included with this product.
•
Never
operate this product if you are under 16 years of age.
•
Never
operate this product when under the influence of drugs, alcohol or medications.
Read installation and operating instructions thoroughly.
T A B L E O F C O N T E N T S
Maintenance/Care ......................................................................................................................page 2
Tools Required .............................................................................................................................page 2
Torque Specifications ................................................................................................................page 3
Parts List.........................................................................................................................................page 3
Installation ................................................................................................................................page 4-5
T O O L S R E Q U I R E D
- Metric wrenches
- Metric sockets
- Fine tooth reciprocating saw
- Small disk sander
N O T I C E
EQUIPMENT DAMAGE
•
Never
tow vehicle by attaching a tow bar to the eyelets on the bumper.
•
Never
attach tow bars directly to the bumper. Damage to bumper may occur. WARN bumpers are not designed to be used for flat towing. Consult with the manufacturer of your tow bar system for the proper vehicle tow
bar brackets..
Read installation and operating instructions thoroughly.
M A I N T E N A N C E / C A R E
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2. Inspect all nuts and bolts on the winch, winch mount and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
