(11)
Audio feedback -
To turn the touch sounds when making a selection ON/OFF
(12)
Heating target -
Control the heating via air or floor sensor
(13)
Heating limits -
Delicate floor coverings such as vinyl, carpet and laminate must be limited to 81°F. Tile
floors can be set to a maximum of 104°F
(14)
Tariff setting -
Select the tariff you are on with your energy provider and enter cost per kWh
(15)
Program setting -
Select a preset program, set a fixed temperature or set your own custom program
(16 )
Setback temperature -
The setback temperature is the temperature you set for periods where you would
like a lower temperature or no heating
NOTE
: when the reset has been pressed, the time for reset will need 5 ~ 15 seconds.
CONNECT TO WARMUP SERVER
ERROR SYMBOLS
Now that the 4iE has been setup you will need to register your device online. Go to
my.warmup.com
and click
register. Enter the password and email address you would like the MyWarmup account to be linked to and click
register. Check your email account for a verification email from Warmup.
You can now log into
my.warmup.com
. When logged in you will have to register your 4iE device number in order
to connect to our server.
Go to the homepage and click the add room icon at the bottom of the page. Enter in all the details required, including
4iE device number, and click register. You will now be able to control your heating through the
my.warmup.com
webpage.
Not connected to WiFi
Not connected to Warmup server
Step 3 - Go to my.warmup.com
Try to reconnect to the WiFi again. Go to menu, settings and network and re-enter your password. Remember the
SSID must be less than 11 characters and password must be less than 10 characters for a successful connection. If
you still cannot connect to your WiFi network contact Warmup on US: (888) 927-6333 or Canada: (888) 592-7687.
Ensure you have visited my.warmup.com and registered your 4iE’s device number. To find your device number press
menu, settings, advanced settings, about and info. Log into my.warmup.com, click room, add room and click full
registration. Enter in all details requested including device number and register. You will now connect to the server.
If after registering the symbol is still displayed please contact Warmup on US: (888) 927-6333 or
Canada: (888) 592-7687.
2
