Inserting Batteries
Insert 2 AAA/ Alkaline type batteries into your remote control
•
Flip the backside of your remote control and pull out battery cover. Insert the batteries in
accordance with the instructions and polarity
of
the batteries.
•
Change the batteries in the same way
as
depicted above.
NOTICE:
•
Batteries not included. Only use AAA/ Alkaline
type batteries. Otherwise, your heater may
not
function well.
•
Do not allow water or liquid to get into the remote control.
Caution:
When the appliance is not operated for a long period of time, cleaning or maintenance is
conducted or when the location of the heater is changed, the heater should be turned to OFF
and unplugged from the electrical connection.
Periodic inspection and removal of dirt and contaminants will ensure that equipment can be
operated safely.
Troubleshooting
1. Check if the power cord is plugged into an electrical outlet, if not, plug in.
2. Check if electricity to the main fuse is working
3. Check to see it the thermostat knob to the ON position
4. Check the thermostat setting, The heater may be off because it has reached the desired
temperature setting.
MAINTENANCE
Attention! Careful and regular maintenance of your heater considering our instructions
assume great importance so as to attain a long efficient operation of your appliance.
▪
The
Reflector and IR-Filament
should be cleaned
at least once a month. If necessary,
apply cleaning and maintenance instructions.
▪
The number of checks may be increased considering the amount of the dust in the
environment.
▪
Check the deformation of the Reflector, Wire and Frame visually while cleaning the
appliance. In case of deformation, consult to your technical service.
▪
Check the Power Cord and Plug visually while cleaning the appliance. In case of
deformation, consult to your technical service.
Cleaning
Regular and careful cleaning helps your infrared heater operate efficiently for
many
trouble free years. To clean your heater follow
the
steps below:
1.
Unplug the power cord for your safety before cleaning your appliance.
2.
Make sure the heater is cool before continuing.
3.
To keep the heater clean, the outer shell maybe cleaned with a soft, damp cloth.
You may use a mild detergent if necessary. After cleaning, dry the unit with a soft
cloth. (CAUTION: DO NOT let liquids enter the heater).
4.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes
to clean the heater. This may cause damage or deterioration to the surface of the
heater.
5.
DO NOT immerse the heater in water
6.
Wait until the heater is completely dry before use.
Содержание Moderno ODHMONBLK
Страница 3: ......
